SIKA SikaStop Remedies and Remedies All in 1 - 5L

SIKA SikaStop curative and descaling treatment All in 1 - 5L, for faades like new, cleared of all green, black and red traces. This product is an aligicide and fungicide treatment that does not require rinsing. Designed for use on floors, roofs and facades. Advantages: Applicable in horizontal or vertical Applicable on all supports: slate, shingle, stone, brick, concrete, mortar, fiber-cement, plaster, earthenware, polyester, zinc Acts quickly and leaves no trace on the materials of which it improves the conservation Long-lasting preventive effect Can be painted or covered with a coating, once the red traces are eliminated On the painted supports, make a preliminary test and wait for a minimum of 72 hours to appreciate the result (check that the paint is not discolored) Read carefully the instructions before using the product Characteristics: Density: about 1 pH value: about 8 In dry weather and without rain 48 hours after the application. Do not apply in hot weather or hot media Consumption: 1 liter for 7 to 10 m Capacity: 5 L Color: colorless Reference: 552459 Packaging: Comes in its original packaging Advice: PREVENTIVE ACTION Treat the media in spring or autumn. autumn to avoid the expansion of green, black and red traces that can cause deterioration: severe fouling, poor runoff of rainwater. Apply Sika Stop TOUT in 1 directly without dilution to the surface to be treated by brush, roller, mop or low pressure sprayer. Do not rinse. CURATIVE ACTION Remove thick traces, large clusters on the covers and floors by scraping or brushing. Then apply Sika Stop TOUT in 1 directly without dilution to the surface to be treated by brush, roller, mop or spray until complete impregnation of the area to be treated. Do not rinse. To let do. The dried out traces will be progressively eliminated under the action of wind and rain or more quickly, by means of a watering with pressurized water jet or by brushing (well to wait until the traces are completely desiccated before This can take 1 to 2 weeks or more depending on the nature and intensity of the traces). Repeat the treatment if necessary in very affected areas. GOOD TO KNOW Treat surfaces in dry weather and without rain 48 hours after application. Do not apply in hot weather or hot media disconnect the water recuperator and wait for heavy rain before the services in case of application on the roof. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.