SIKA Sikatop hydraulic micro-mortar 107 Protection - Gray - 25kg, easy to use, this micro-mortar allows the waterproofing of concrete structures and their protection against carbonation and other atmospheric aggressions. This product is applied by roller, brush or spray. Advantages: A mortar more "soft" than a traditional mortar Provides concrete protection against cabonation Waterproof but permeable to water vapor making it an excellent complement of water-proofing for all hydraulic structures Has a good adhesion on many surfaces: concrete, mortar, stone, brick. Good resistance to frost and de-icing salts Pre-dosed product, easy to use Application possible on damp substrate Characteristics: Density: about 2. Maximum particle size: 0 / 0.5 mm Layer thickness: about 0.8 to 1 , 0 mm Consumption: 3 to 4 kg / m for both layers. Application temperature: + 5 C min. / + 30 C max. Practical duration of use: 30 to 40 min at + 20 C. Recovery timeout: Between two layers: 2 to 6 hours, depending on the temperature Final setting time: The waiting time before re-watering (structures storing water) is related to the temperature: 5 C : 10days / + 20 C: 7days / + 30 C: 5days Color: gray Packaging: 25kg Kit -Component A: 5kg can - Component B: 20kg bag Reference: 400288 Packaging: Comes in original packaging Advice: SUPPORT Substrates must be clean, sound, dust-free, free of any loose parts, free of oil and grease. Concrete substrates must be older than 28 days and have a surface cohesion of at least 1 MPa. Mechanical preparation (sandblasting or stripping), so as to eliminate all traces of formwork oil, old coating or laitance, non adherent part or that can affect the adhesion. The support is humidified to refuse the day before the implementation. It is moistened again the same day of the application. Make sure, however, that it is non-wetting and free of any water film at the time of use of SikaTop 107 Protection. APPLICATION The application can be done by brush, roller or projection. At least two layers are required for use in addition to waterproofing. Finishing can be done by brushing. To bridge any micro cracks of the support and improve the resistance of the coating to cracking and crazing, it is possible to use the Sika Canvas 75, anti-alkali-treated glass frame, to be ground in the first layer of SikaTop 107 Protection . Projection application: SABLON S3 of SULLAIR, SP5 of PUTZMEISTER, TURBOSOL T6 distributed by IMER FRANCE, N2V of PFT. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.