SIKA Sikatop 145 Waterproofing Coating - White - 25kg

SIKA Sikatop waterproofing coating 145 Cuvelage - White - 25kg, a two-component pre-dosed mortar allowing the realization of a waterproofing coating for new or rehabilitated casing work to prevent pressurized water to penetrate concrete works. Advantages: Pre-dosed product Easy to use and safe to use Very good adhesion to concrete Product resistant to hydrostatic backpressures New or rehabilitation work Characteristics: Density: fresh: 2 kg / liter for the fresh mortar Granulometry: 0 to 0.4 mm Application temperature: + 5 C min. / + 30 C max Consumption: 4 kg / m in two layers (2 x 2 kg / m) for a total thickness of 2 mm Practical time of use: 60 min at + 20 C Colors: white Packaging: Kit 25kg -Component A: Bidon 2kg - Component B: Bag 20kg Reference: 400338 Packaging: Comes in its original packaging Advice: SUPPORT The support must be clean, healthy and have undergone a suitable surface preparation to rid of any non or little adherent. In particular, it will be free of oil, grease, laitance, curing compounds and any substance that may affect adhesion. It must have the following minimum mechanical strengths: cohesion of at least 1 MPa in direct traction, compressive strength of at least 25 MPa. During application, the substrate must be saturated with water. For this, water abundantly the day before and moisten again, if necessary, just before implementation. Ensure, however, that no film or puddle remains on the surface, which could affect the quality and adhesion of the coating. APPLICATION Pour all component A (liquid) into a clean container (30 L can with full opening). Gradually add the whole of component B (powder) by mixing with an electric or pneumatic stirrer at low rotational speed (300 rpm) with a 4-limbed propeller for 2 to 3 minutes, until obtaining a creamy mortar of uniform color and consistency. Apply the product by brush, roller or spraying (projection equipment type WAGNER PC5, TURBOSOL T6) on the wet but non-suspending substrate. Two layers are needed. Apply the second coat as soon as the first coat has hardened (usually 2 to 6 hours depending on temperature and humidity). Refer to TCC 43 available on the manufacturer's website. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.