SIKA SikaWall Wall and Ceiling Filler and Filler Repair - 4Kg, Filler and Repair Powder is a plaster-based, powder-based filler to be mixed with water for filling and levelling uneven surfaces. Advantages : For holes and cracks Strong adhesion Easy to apply and sand Resistant to drilling Can be painted Dry to the touch in 2 hours Excellent glide High covering power Thickness up to 5 mm per layer Low dust emission Features : Appearance: powder Colour: white Packaging: 10 Kg bag Density: approx. 0.90 (powder) Maximum grain size: 0.2 mm Consumption: Approx. 1 Kg/m per mm thickness Layer Thickness: Between 0.6 mm and 5 mm per layer Approvals / Standards: Declaration of performance (CE mark) according to NF EN 13279-1:2005 Reference : 593318 Packaging : 1x SIKA SikaWall Wall and Ceiling Filler and Filler - 4Kg Delivered in its original packaging Tips : SUPPORT The substrate must be in compliance with DTU 59.1, clean, sound, resistant, free of any traces that may affect adhesion, such as curing products, paints, release oils, laitance, etc... Traces of paint or glue must be removed by any appropriate means. MIXING Mix manually or mechanically with an electric mixer at low speed the contents of a 20 Kg bag of Sikawall Filler and Repair Powder with about 9.5 litres of water until a homogeneous mixture is obtained. For 4 Kg of powder, provide about 1.9 litres of mixing water. APPLICATION Apply the mixture to the substrate using a stainless steel smoothing machine or a plastering blade. Apply a second coat if necessary as soon as the first one has started to fire. LIMITATIONS Do not apply to : External support Wet support At a temperature below +5C or above +35C