SIKA Stop all-in-one curative and descaling treatment 1 - 5L

Manufacturer: Sika
Manufacturer part number: 619474-REMPLAC PAR 26015
€30.50
i h
SIKA Stop all-in-one curative and descaling treatment in 1 - 5 litres, colourless, odourless, ready-to-use liquid that does not need to be rinsed off, with a highly reinforced active ingredient formula for effective treatment of roofs, facades and floors. Advantages : Can be applied horizontally or vertically Applicable on all substrates: slate, shingle, stone, brick, concrete, mortar, fibre cement, plaster, earthenware, polyester, zinc. Acts quickly and leaves no traces on the materials whose conservation it improves Long-lasting preventive effect Can be painted or covered with a coating, once the traces have been removed. On painted surfaces: make a preliminary test and wait at least 72 hours to assess the result (check that the paint is not discoloured). Features : Packaging: 5 litres Colour: ready-to-use liquid preparation, colourless and odourless Shelf life: 3 years in original packaging Density: about 1 pH value: approx. 8 Reference number: 619474 Packaging : 1x SIKA Stop all in 1 - 5L SIKA Stop treatment and descaling agent Delivered in its original packaging Tips : APPLICATION Preventive action Treat supports in spring or fall to avoid the expansion of green, black and red streaks that can cause deterioration. Apply it directly without dilution to the surface to be treated with a brush, roller, sponge brush or low pressure sprayer. Do not rinse Healing action : Remove thick traces, large lumps on cover and soil elements by scraping or brushing. Then apply sika stop all-in-one directly without dilution to the surface to be treated using a brush, roller, sponge brush or sprayer until the area to be treated is completely impregnated. Do not rinse, leave to act Dried out traces will be gradually removed under the action of wind and rain or more quickly, using a pressurised water jet or brushing. Repeat the treatment if necessary in severely affected areas. LIMITATION Protect the joinery, especially those made of aluminium or lacquered steel. Rinse accidental splashes and drips on lacquered joinery and gutters with clean water as quickly as possible. Apply in dry weather with at least 48 hours without rain after application. Do not apply in hot weather, on hot surfaces (risk of evaporation). Do not apply to frozen or thawing substrates. Leave on, do not rinse after application. Avoid runoff and contact with soil, watercourses, sewers and drains.
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews