SIKA Treatment and Protection Pack - Sikagard-120 Stop Green 20L - Sikagard-222 High Protection Facade 20L

SIKA Treatment and Protection Pack - Sikagard-120 Stop Vert 20L - Sikagard-222 High Protective Facade 20L, to effectively eliminate green marks, prevent their reappearance and waterproof your surfaces. SIKA - Sikagard-120 Stop Vert is the ideal algicide and fungicide treatment to get rid of green marks on facades, floors and roofs without damaging the substrate. The product is easy to use and effective on most substrates (slate, stone, brick, concrete, mortar, plaster, earthenware, shingle, polyester, zinc, painted substrates ...) both in vertical and horizontal application. SIKA Water Repellent - Sikagard-222 High Protection Facade is a colorless impregnation for all facades, roofs and exteriors particularly exposed to weather. It provides waterproofing and long-term protection against run-off water thanks to deep penetration of the substrate, but also better resistance to soiling. Can be applied to most surfaces! Sika is a leading chemical company in the development and manufacture of systems and products for bonding, sealing, soundproofing, reinforcement and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now! Benefits : Sikagard-120 Stop Green: Can be applied horizontally or vertically Easy application, no rinsing Can be applied to all substrates: slate, shingle, stone, brick, concrete, mortar, fiber cement, plaster, earthenware, polyester, zinc, painted substrates Does not leave traces on the materials Preventive effect Can be painted or coated, once the green traces are eliminated Sikagard-222 High Protection Facade : Water-based product with high water repellency Penetrates deeply into the substrate without smothering Improves the resistance of facades to water penetration Lets the support breathe while ensuring the waterproof protection of the building materials Improves resistance to dirt and reduces the adhesion of mosses and lichens. Can be overcoated with various paints Features : Sikagard-120 Stop Green : Density: ? 1 pH value: ? 8 Treat in dry weather with at least 48h without rain after application. Do not apply in too much heat, on too hot a surface. Consumption: ? 1 L for 7 to 10 m. Odorless Color : colorless Capacity : 20 L Ref. 698414 Sikagard-222 High Protective Facade : Density: ? 1 pH value: between 7 and 10 Consumption: On mortar: 0.15 L to 0.20 L/m - On porous materials: 0.30 L to 0.50 L/m Application temperature: +5C to +30C. Do not apply below 5C Waiting time: Drying time is a few hours depending on weather conditions. Must be protected from rain for at least 3 hours Color : Milky white Capacity : 20 L Ref. 704080 Packaging : Treatment and Protection Pack SIKA - Sikagard-120 Stop Vert 20L - Sikagard-222 Haut Protecteur Facade 20L1x Algaecide and fungicide treatment SIKA - Sikagard-120 Stop Vert - 20L1x Water repellent SIKA - Sikagard-222 Haut Protecteur Facade - 20LDelivered in their original packagingCarefully read the instructions before use