SIKA Treatment and Protection Pack - Sikagard-120 Stop Green 5L - Sikagard-222 High Protection Facade 5L

SIKA Treatment and Protection Pack - Sikagard-120 Stop Vert 5L - Sikagard-222 High Protective Facade 5L, to effectively eliminate green marks, prevent their reappearance and waterproof your surfaces. SIKA Algaecide and Fungicide Treatment - Sikagard-120 Stop Green - 5L is ready to use, effectively eliminates green streaks and prevents their reappearance on roofs, facades and floors. The application is fast, simple and does not leave traces on the materials for a healthy and clean house in only one gesture. SIKA Water Repellent - Sikagard-222 High Protective Facade - 5L provides waterproofing and long-lasting protection against water runoff through deep penetration of the substrate, but also better resistance to soiling. Specialized in chemical products, Sika is a leader in the development and manufacture of systems and products for bonding, sealing, soundproofing, reinforcement and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now! Benefits: Sikagard-120 Stop Green Can be applied horizontally or vertically Easy application, no rinsing Can be applied to all substrates: slate, shingle, stone, brick, concrete, mortar, fiber cement, plaster, earthenware, polyester, zinc, painted substrates Does not leave traces on the materials Preventive effect Can be painted or coated once the green traces have been eliminated On painted supports, make a preliminary test and wait 72 hours minimum to appreciate the result (check that the paint is not discoloured) Read carefully the instructions before use Sikagard-222 High Protection Facade Water-based product with high water repellency Penetrates substrates thoroughly Improves the resistance of facades to water penetration Lets the support breathe while ensuring the waterproof protection of the building materials Improves resistance to dirt and reduces the adhesion of mosses and lichens. Eliminates the effects of porosity in masonry, concrete and mortar facades: prevents water infiltration into non-cracked materials Invisible protection: generally does not modify the appearance of the material, which retains its natural shape and colors Cleanliness of facades exposed to rain: the water runoff on the treated parts facilitates the elimination of dust, soot Improvement of the thermal insulation: a dry wall has a coefficient of thermal insulation much higher than that of a wet wall Can be covered by different paints Characteristics : Sikagard-120 Stop Green Density: ? 1 pH value: ? 8 Treat in dry weather with at least 48h without rain after application. Do not apply in too much heat, on too hot a surface. Consumption: ? 1 L for 7 to 10 m. Odorless Color : colorless Capacity : 5 L Ref. 698412 Sikagard-222 High Facade Protector Density: ? 1 pH value: between 7 and 10 Consumption: On mortar: 0.15 L to 0.20 L/m - On porous materials: 0.30 L to 0.50 L/m. Application temperature: +5C to +30C. Do not apply below 5C Waiting time: Drying time is a few hours depending on weather conditions. Must be protected from rain for at least 3 hours Color : Milky white Capacity : 5 L Ref. 704106 Packaging : SIKA Treatment and Protection Pack - Sikagard-120 Stop Vert 5L - Sikagard-222 Haut Protecteur Facade 5L1x SIKA Algicide and Fungicide Treatment - Sikagard-120 Stop Vert - 5L1x SIKA Water Repellent - Sikagard-222 Haut Protecteur Facade - 5LDelivered in their original packagingCarefully read the instructions before use