SIKA Treatment and Protection Pack - Sikagard-120 Stop Vert 5L - Sikagard-221 Facade Protector 5L

SIKA Treatment and Protection Pack - Sikagard-120 Stop Vert 5L - Sikagard-221 Facade Protector 5L, to effectively eliminate green marks, prevent their reappearance and waterproof your surfaces. SIKA's algicide and fungicide treatment - Sikagard-120 Stop Vert - 5L is ready to use and effectively eliminates green streaks and prevents their reappearance on roofs, facades and floors. The application is fast, simple and does not leave traces on the materials for a healthy and clean house in only one gesture. SIKA Water Repellent - Sikagard-221 Facade Protector - 5L prevents water infiltration inside non-cracked masonry, concrete and mortar facades. The support breathes in spite of everything and the protection is completely invisible, the material thus preserves its model and its natural colors. Specialized in chemical products, Sika is a leader in the development and manufacture of systems and products for bonding, sealing, soundproofing, reinforcement and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now! Benefits: Sikagard-120 Stop Green Can be applied horizontally or vertically Easy application, no rinsing Can be applied to all substrates: slate, shingle, stone, brick, concrete, mortar, fiber cement, plaster, earthenware, polyester, zinc, painted substrates Does not leave traces on the materials Preventive effect Can be painted or coated once the green traces have been eliminated On painted supports, make a preliminary test and wait 72 hours minimum to appreciate the result (check that the paint is not discoloured) Read carefully the instructions before use Sikagard-221 Facade Protector Eliminates the effects of porosity on masonry, concrete and mortar facades Air permeability is assured: the substrate "breathes". Totally invisible protection Cleanliness of facades exposed to rain: water run-off on the parts treated with Sikagard Facade Protection facilitates the elimination of dust, soot, etc. Improved thermal insulation: A dry wall has a much higher thermal insulation coefficient than a wet wall. Decrease of moss, lichen, ... Characteristics : Sikagard-120 Stop Green Density: approximately 1 pH value: approx. 8 Dry weather and no rain 48 hours after application. Do not apply in hot weather or on too hot a surface. Consumption: 1 liter for 7 to 10 m approximately Color: colorless Capacity : 5 L Ref. 698412 Sikagard-221 Facade Protector Density: ? 1 pH value: between 11.5 and 13 Consumption: On mortar: 0.15 L to 0.20 L/m - On porous materials: a preliminary test is necessary Application temperature: from +5C Color: Colorless after drying Capacity : 5 L Ref. 707020 Packaging : SIKA Treatment and Protection Pack - Sikagard-120 Stop Vert 5L - Sikagard-221 Facade Protector 5L1x SIKA Algicide and Fungicide Treatment - Sikagard-120 Stop Vert - 5L1x SIKA Water Repellent - Sikagard-221 Facade Protector - 5LDelivered in their original packagingCarefully read the instructions before use