SikaBond 52 elastic adhesive parquet - 300ml - Sika

Manufacturer: Sika
Be the first to review this product
Manufacturer part number: 428768
Vendor: Espace-Bricolage
€16.43
i h
SIKA elastic adhesive SikaBond 52 Parquet - 300ml, easy to extrude for an easy implementation that is suitable for laying parquet cord or for bonding on acoustic sub - layer. this product allows a reduction of the sounds of impacts and reduces the propagation of constraints between the floor and the support.
Products specifications
Adhesive colourTransparent
Size (L / ml / g / gal /oz)300ml
AdvantagesFast polymerization sanding of parquet glued after 12 hours at + 23 ° c and 50% rh easy to apply, easy to extrude excellent initial tack elastic glue that reduces the sound of impact noises suitable for gluing most common floors specially adapted for nerve woods such as: beech, maple and bamboo suitable for glueing wooden floors directly on old tiles reduces the stress on the support: the elastic glue reduces the propagation of the stresses between the floor and the support suitable for the laying on heated floors rattrape flatness defects sikabond 52 parquet can be sanded characteristics: density: 1, 29 approx. skin formation time: approx. 60 min. at + 23 ° c and 50% rh polymerisation speed: approx. / 24 hours at + 23 ° c and 50% rh colours: brown capacity: 300ml reference: 428419 characteristics: delivered in its original packaging advice: support the supports must be clean, dry, cohesive, homogeneous, healthy, free from grease, dust and loose particles. paint, laitance and other loose parts should be removed by sanding until a cohesive support is obtained. in addition, in all cases the supports must be: planes, stable and be adherent to their support, have a direct tensile cohesion of at least 0.5 mpa, be free of any product that may impair the adhesion of the primary eventual and glue.
Applicationplease consult the manufacturer product leaflet available on the sika.fr website., For SikaLayer acoustic sub-layer bonding: for further information please refer to the SikaLayer 05 / PH / PC3 Product Instructions. For cord bonding: After inserting the cartridge or refill into the manual, pneumatic or electric gun, extrude the SikaBond 52 Parquet using a 6 mm diameter circular nozzle with a maximum center distance of 150 mm. The blades can then be tightened with a hammer and an intermediate piece. Many types of parquet must be beaten from above for tightening. The required peripheral joint between the floor, the walls and the joinery must comply with the requirements of the parquet manufacturer. Excess unpolymerized glue should be removed immediately from the floor surface with a clean cloth and if necessary with Sika Remover 208 or Sika Clean impregnated wipes. Compatibility tests between parquet and Sika Remover 208 should be carried out before use. The floors must be laid in accordance with DTU 51.2 and the requirements of the parquet manufacturer. Use Sika products with care. Before use
0 review(s)
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews