Sikabond 54 elastic adhesive parquet - 13kg - Sika

Manufacturer: Sika
Be the first to review this product
Manufacturer part number: 421469
Vendor: Espace-Bricolage
€229.90
i h
SIKA elastic adhesive SikaBond 54 Flooring - 13kg, suitable for bonding most common floors and laying on heated floors. This product will surprise you by its ease of implementation, its speed of polymerization and you will reduce the sound of impact noise.
Products specifications
Adhesive colourBrown parquet
AdvantagesMono component, ready to use fast polymerization easy to use sanding of parquet glued after 12 hours at + 23 ° c and 50% rh (spatulas b6 and b11) elastic adhesive that reduces the sound of impact noises suitable for bonding most common wood floors specially adapted for nerve woods such as: beech, maple and bamboo suitable for gluing parquet floors directly on old tiles reduces stress on the substrate: the elastic adhesive reduces the propagation of stresses between parquet and support suitable for laying on heated floors sikabond 54 parquet can be sanded characteristics: density: 1, 29 approx. skin formation time: approx. 60 min. at + 23 ° c and 50% rh polymerisation speed:> 4.0 mm / 24 hours at + 23 ° c and 50% rh colours: brown consumption: from 700 to 900 g / m² with a notched trowel b6 / from 800 at 1000 g / m² with a notched spatula b11 capacity: 13kg part number: 421469 characteristics: delivered in its original packaging advice: support apply the product on a dry, cohesive, saim, clean, homogenous base without any traces of grease, dust and other loose particles. in addition, in all cases the supports must be: planes, stable and be adherent to their support, have a direct tensile cohesion of at least 0.5 mpa, be free of any product that may impair the adhesion of the primary eventual and glue. substrates suitable for glued parquet are defined in the dtu 51.2
Size (L / ml / g / gal /oz)13Kg
Applicationwalls and joinery. Excess unpolymerized glue should be removed immediately from the wood floor surface with a clean cloth and, if necessary, with Sika Remover 208 or Sika Clean impregnated wipes. Compatibility tests between parquet and Sika Remover 208 should be carried out before use. The floors must be laid in accordance with the DTU 51.2, and the requirements of the parquet manufacturer (moisture content, peripheral joints, joints between blades, etc ...) Use Sika products with care. Before use, please consult the manufacturer product leaflet available on the sika.fr website., SikaBond 54 Parquet is applied to the carefully prepared substrate directly from the bucket and distributed evenly using the notched spatula. Thoroughly rub the parquet boards in the glue so as to obtain a good adhesion on all their under face. The blades can then be tightened with a hammer and an intermediate piece. Many types of parquet must be beaten from above for tightening. A peripheral joint between 10 and 15 mm must be respected at the junction of parquet
0 review(s)
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews