Sikaflex 11 fc evolution adhesive putty - white - 300ml - Sika

Manufacturer: Sika
Manufacturer part number: 547500
€12.89
i h
SIKA Sikaflex 11 FC Evolution Adhesive Sealant - White - 300ml, for an immediate powerful hold, this polyurethane adhesive sealant has a very good adhesion on many supports.
Products specifications
Size (L / ml / g / gal /oz)300ml
ApplicationInstall the cartridge in a manual, pneumatic or electric gun. For ease of use, the adhesive sealant should be at a temperature of + 20 ° C approx. For proper curing of the adhesive sealant, a humid environment is necessary. Grouting The width of a joint shall be defined in accordance with the required joint movement and the ability of the sealant to move. All joints must be properly designed and dimensioned in accordance with the relevant standards prior to their construction. The calculation parameters for the required joint widths are the type of building and its dimensions, the technical data of building materials adjacent to the joint and the sealant joint, plus the specific exposure of the building and joints. Seam sizing shall be in accordance with DTU 44.1 (NFP 85-210-1). Do not make joints less than 5 mm wide and more than 20 mm wide. Use a Sika JOINT FUND, set up with a non-cutting tool so as not to damage its surface. Apply the adhesive sealant in continuous joint and in one or more passes depending on the width of the joint, avoiding any inclusion of air. Tighten the mastic-adhesive against the supports then smooth it with a spatula moistened with Sika TOOLING AGENT N before it forms a skin. For larger seals, consult the technical service. Bonding Apply a 5 mm diameter cylindrical bead of glue to one of the prepared substrates, several centimeters apart. If necessary, leave regularly with a notched spatula. Press or firmly tap the assembled pieces to allow good adhesion before skin forms. The thickness of the mastic-adhesive layer depends on the regularity of the support and must be less than 3 mm. If necessary, use double-sided tape or shims or clamps to hold together the assembled elements. A poorly positioned element can be easily adjusted within 5 minutes of application. Press again. Fresh and uncured adhesive mastic that persists on a surface should be removed immediately. The final strength will be obtained after the complete polymerization of Sikaflex 11 FC Evolution. Use Sika products with care. Before use, please consult the manufacturer product leaflet available on the sika.fr website.
AdvantagesPowerful immediate hold fastening without support strips, nails or screws very good adhesion on many substrates high load capacity easy application fast polymerization very low emissions use with a manual, electric or pneumatic gun characteristics: density: 1.3 kg / l approx. skin formation time: 15 minutes approx. at + 23 ° c and 50% rh polymerisation speed: approx. in 24 hours at + 23 ° c and 50% rh application temperature: +5 ° c to +40 ° c colours: white packaging: delivered in its original packaging advice: support supports must be clean, dry, healthy flat and homogeneous, free of oils, grease, dust and loose or friable particles. loose, friable or peeling paint, cement laitance and other weakly adhering or poorly cohesive elements should be removed. sikaflex 11 fc evolution adheres without primer or activator. however, for optimum adhesion and performance applications such as renovation work, heavy-duty joints, highly weather-exposed joints and temporarily immersed joints in water, primers and degreasers and surface preparations.
Adhesive colourWhite
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews