Sikaflex high tack quick - setting mastic glue - White - 300ml - Sika

Quick - setting adhesive - SIKA Sikaflex High Tack - White - 300ml, is a powerful immediately holding adhesive with a high load capacity for indoor and outdoor application. Advantages: Powerful immediate support Fixing without retaining strips, nails or screws Very good adhesion on many substrates High load capacity Easy application Fast polymerization Can be used on wet concrete Very low emissions Features: Density 1.30 kg/l approx. Substrate temperature: +5°C to +40°C Curing rate: approx. 3 mm / 24 hours at +23°C and 50% RH Skin formation time: approx. 15 minutes at +23°C and 50% RH Consumption: approx. 15 m of cord with an open nozzle 5mm in diameter per 300 ml cartridge (approx. 20 ml per linear meter) Packaging: 300ml Reference: 465497 Packaging: 1x Quick setting adhesive - SIKA Sikaflex High Tack - White - 300ml Delivered in its original packaging Tips : The substrate must be clean, dry, sound, and homogeneous, free of oils, grease, dust and loose or friable particles. Paint, cement laitance and other weakly adhering elements must be removed. After the necessary preparation of the supports, install a cartridge in the sealant gun and extrude Sikaflex High Tack. Apply Sikaflex High Tack in 5mm diameter beads at intervals of several centimetres. If necessary, use a notched spatula to evenly distribute the Sikaflex High Tack. Press or tap the pieces glued together firmly to ensure good adhesion before a skin is formed. An incorrectly positioned element can be easily dismantled and repositioned for the first few minutes after application. Press again. The recommended adhesive thickness (depending on the surface irregularities of the substrate) is less than 3mm. Fresh, uncured, persistent glue on the surface must be removed immediately. The final strength will be obtained after the complete polymerization of Sikaflex High Tack.