Sikagard 790 All-in-one Water Repellent - 5L - To be used before 19/04/2020

EXPIRY DATE: 19/04/2020 Sikagard 790 All-in-one Water Repellent - 5L - To be used before 19/04/2020, ready to use, this waterborne product is suitable for all types of facades, floors and roofs. It offers invisible protection against the penetration of water, oil and diesel and facilitates the removal of graffiti. UV-resistant, non-yellowing and easy to apply without waiting time between coats. Advantages : Aqueous phase product Indoor / outdoor use Protects against the penetration of water, oil, diesel oil, etc. Protects against stains Suitable for all types of facades, floors and roofs Can be used on most building materials Fast application (in 1 or 2 coats) without waiting time between coats Provides invisible protection Allows the support to breathe Resistant to ultraviolet rays, does not yellow Gives a pearl effect on certain materials Facilitates the removal of graffiti (use a specific anti-graffiti cleaner, follow the manufacturer's recommendations) Read the manual carefully before use Features : Density: about 1 at 20C pH: approx. 6 at 20C Application temperature: + 5C minimum to + 30C maximum Consumption: On very porous substrates: from 0.30 L to 0.60 L per m and per coat / On low porous substrates: from 0.05 L to 0.20 L per m and per coat Colour : Colourless Deadline for use : 19/04/2020 Packaging : 1x Sikagard 790 All-in-one Water Repellent Protection - 5L - To be used before 19/04/2020 Delivered in its original packaging Tips : SUPPORT The substrate must be clean, dust-free and dry. All particles that do not adhere to the substrate and contaminations (stains, traces of oil, grease, etc.) must be removed by brushing or washing with pressurised water. Before applying the product, it is also recommended to clean the surface (foam, drips, traces of pollution, etc.). Application Apply by brush, roller, or low-pressure sprayer directly to the surface to be treated until the material is saturated. On low porous support : only one coat is sufficient. The substrate must be impregnated evenly but not excessively. Avoid overconsumption and eliminate drips if necessary. On porous support: Application in 2 coats. The first layer as shown above. The second coat is applied before the first coat is completely dry (touch dry), maximum 30 minutes after the first coat. Split the application of large areas into zones of 10 to 20 m. Even application without excess. Avoid overconsumption and eliminate drips if necessary. Use Sika products with care. Before use, please consult the manufacturer's product manual available on the sika.com website.