Sikaseal 108 sanitaire silicone sealant - white - 300ml - Sika

Manufacturer: Sika
Be the first to review this product
Manufacturer part number: 524946
Vendor: Espace-Bricolage
€9.42
i h
Silicone anti - mold sealant SIKA Sikaseal 108 Sanitaire - White - 300ml, thanks to a biocidal agent, this putty has a real resistance to mold and prevents the proliferation of fungi. Ideal for the realization of sanitary joints, it is easy to implement and adheres on many supports without primary.
Products specifications
AdvantagesA thixotropic putty that can be used for vertical and horizontal joints air-based polymerization contains a biocidal product to effectively fight fungi and molds applies without primer on most substrates excellent resistance to microorganisms complies with en 15651-1, type f ext-int cc class 12.5 e without primer on glass and anodized aluminum conforms to en 15651-3, type s, class xs1 without glass primer and anodized aluminum read the package leaflet before use characteristics: density: 0, 98-1, 05 application temperature: + 5 ° c to + 40 ° c polymerisation speed: 2 to 3 mm approx. in 24 hours at + 23 ° c and 50% rh skin formation time: 25 minutes approx. at + 23 ° c and 50% rh consumption: allows to realize 8 to 9 meters of a joint in solin of 8 x 8 mm colours: white conditonnement: 300ml reference: 524946 packaging: 1x silicone sealant anti-mold sika sikaseal 108 sanitary - white - 300ml delivered in its original packaging advice: support the supports must be cohesive, healthy, dry and clean. remove all old sealants and any other products that may affect adhesion. the support should always be dusted and degreased with a clean cloth slightly moistened with alcohol or acetone. for synthetic substrates must be degreased with a clean cloth slightly impregnated with sika aktivator 205. before applying the sealant, allow to dry for at least 15 minutes.
ApplicationCut the tapered end of the tip of the cartridge on which is screwed the cannula pose. Then cut it in bevel to the desired diameter. Apply the putty in a continuous joint avoiding any inclusion of air with a manual, pneumatic or electric gun Tighten the sealant against the supports then immediately after, smooth its surface with a finger soaked in soapy water, before it forms a skin, avoiding crushing the seal so that the runoff flows naturally. Let dry before commissioning Use Sika products with care. Before use, please consult the manufacturer product leaflet available on the sika.fr website.
Silicone / sealant colourWhite
Size (L / ml / g / gal /oz)300ml
0 review(s)
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews