Sikasil pool silicone sealant - transparent - 300ml x 2 - Sika - Transparent - 300ml

Set of 2 silicone sealants SIKA Sikasil Pool - Transparent - 300ml, This set of products allows to make joints in and around swimming pools and wet areas permanently. It is a multi - purpose product for totally transparent caulking joints. Advantages: 100% transparent Very good water resistance Good resistance to chlorine Excellent resistance to the development of microorganisms Non - corrosive High elasticity and flexibility Read the instructions carefully before use Features: Density: ~1.05 kg/l Skin formation time: ~5 min (23 °C / 50% RH) Curing rate: ~2.0 mm/24 h (23 °C / 50% RH) Application temperature: +5 °C min. / +40 °C max. at 3°C minimum above dew point Colour: Transparent Reference: 150296x2 Packaging: 1x Set of 2 SIKA Sikasil Pool Silicone Sealant - Transparent - 300ml Delivered in its original packaging Tips : Support: Sikasil Pool is supplied ready for use. After the necessary preparation of the supports, install in the joint to the required depth, a Sika JOINT FOUNDATION with a cross - section adapted to the width of the joint. If necessary, apply a Sika primer. Install the cartridge in a putty gun. Extrude the Sikasil Pool sealant into the joint and press it onto the lips of the joint, making sure they are in good contact with them. Fill the joint continuously and avoid any inclusion of air bubbles. Sikasil Pool must be tightened firmly against the lips of the joint to allow good adhesion. It is recommended to use protective strips for the Supports if joints with clean and straight edges are required. Remove the strips before the sealant forms a skin. Use a compatible smoothing liquid, either Sika Tooling Agent N, to smooth the surfaces of the sealant joint before a skin is formed. Do not use any smoothing agents containing solvents. Use Sika products with caution. Before use, please consult the manufacturer's product manual available on the sika.com website.