Silicone resin SIKA Sanisil - White - Lot 2 cartridges 300ml

Silicone resin SIKA Sanisil - White - Lot 2 cartridges 300ml, ideal for caulking or any sanitary application requiring a mold resistant product. This sealant also has good elasticity and flexibility for greater versatility. Advantages: High elasticity and flexibility Resistance to fungi and mold in the long term Very good resistance to UV and weathering Sanitary application Caulking work Characteristics: Density: 1.00 kg / l env Polymerization speed: 3.0 mm / 24 hours (23 C / 50% RH) Skin formation time: 15 minutes approx. (23 C / 50% RH) Application temperature: +5 C to +40 C Packaging: 2 cartridges of 300ml Color: White Reference: 172900 Packaging: Comes in its original packaging Advice: SUPPORT The support must be clean, dry, sound, and homogeneous, free of oils, grease, dust and loose or friable particles. Paint, cement laitance and other loosely adhering elements should be removed. Adheres without primer or activator. However, for optimal adhesion and performance applications such as renovation, seals and joints heavily exposed to the weather or immersed in water, primers and degreasers and surface preparations. APPLICATION After the necessary preparation of the supports, install in the joint at the required depth, a Sika JOINTS FIT of section adapted to the width of the joint. If necessary, apply a Sika primer. Install the cartridge in a putty gun. Extrude the Sika Sanisil sealant into the seal and press it onto the seal lips making sure they are in good contact with them. Fill the joint continuously and avoid any air bubbles. Sika Sanisil should be tightly squeezed against the lips of the joint to allow good adhesion. It is recommended to use media protection strips if clean, straight edge joints are required. Remove the strips before the putty forms a skin. Do not use a smoothing agent containing solvents. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.