Silicone sealant sikaseal 109 carpentry - gray - 300ml - Sika

Manufacturer: Sika
Manufacturer part number: 525040
€7.43
i h
Silicone sealant SIKA Sikaseal 109 Carpentry - Gray - 300ml, usable indoors and outdoors, this silicone sealant is easy to implement and will be suitable for all your renovations or new. Insensitive to weathering after polymerization, it will resist the vagaries of aging.
Products specifications
Silicone / sealant colourGray
Size (L / ml / g / gal /oz)300ml
AdvantagesAdherence that does not require primer on most substrates very low odor easy application and smoothing does not flow remains flexible even at low temperature insensitive to weathering after curing characteristics: density: 1, 01 approx. application temperature: + 5 ° c to + 40 ° c polymerisation speed: approx. in 24 hours at + 23 ° c and 50% rh skin formation time: 35 minutes approx. at + 23 ° c and 50% rh colours: gray packaging: 300ml reference: 525040 packaging: 1x silicone sealant sika sikaseal 109 carpentry - gray - 300ml delivered in its original packaging advice: support the substrates must be cohesive, sound, clean and dry. in all cases of use, the supports and the lips of the joints must be rid of all parts not or only adherent and any product which can affect the adhesion of the sealant (grease, oil, dust).
ApplicationRespect the DTU 44.1. In particular, do not make joints with a width of less than 5 mm. Use a Sika JOINTS FUND set up with non-sharp tools to avoid damaging the surface. Apply sealant in continuous joint with a manual, pneumatic or electric gun, avoiding any inclusion of air. Carefully tighten the sealant against the seal lips. Then smooth with a brush moistened with slightly soapy water, if necessary, before it forms a skin. Use Sika products with care. Before use, please consult the manufacturer product leaflet available on the sika.fr website.
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews