Silicone sealant sikasil pool - grey - 300ml x 2 - Sika

Set of 2 silicone sealants SIKA Sikasil Pool - Grey - 300ml, It allows to make joints in and around swimming pools and wet areas permanently thanks to its very good resistance to water and chlorine. Advantages: Very good water resistance Good resistance to chlorine Excellent resistance to the development of microorganisms Non - corrosive High elasticity and flexibility Read the instructions carefully before use Features: Density: ~1.05 kg/l Skin formation time: ~5 min (23 °C / 50% RH) Curing rate: ~2.0 mm/24 h (23 °C / 50% RH) Application temperature: +5 °C min. / +40 °C max. at 3°C minimum above dew point Colour: Gray Reference: 130877 Packaging: 1 x Set of 2 silicone sealants SIKA Sikasil Pool - Grey - 300ml Delivered in its original packaging Tips : Support: The substrate must be clean, dry, sound, and homogeneous, free of oils, grease, dust and loose or friable particles. Sikasil Pool adheres without primer or activator but for better adhesion you can use Sika Aktivator 205 for non - porous substrates and Sika Primer 3N for porous substrates. Application: Sikasil Pool is supplied ready for use. After the necessary preparation of the supports, install in the joint to the required depth, a Sika JOINT FOUNDATION with a cross - section adapted to the width of the joint. If necessary, apply a Sika primer. Install the cartridge in a putty gun. Extrude the Sikasil Pool sealant into the joint and press it onto the lips of the joint, making sure they are in good contact with them. Fill the joint continuously and avoid any inclusion of air bubbles. Sikasil Pool must be tightened firmly against the lips of the joint to allow good adhesion. It is recommended to use protective strips for the Supports if joints with clean and straight edges are required. Remove the strips before the sealant forms a skin. Use a compatible smoothing liquid, either Sika Tooling Agent N, to smooth the surfaces of the sealant joint before a skin is formed. Do not use any smoothing agents containing solvents. Use Sika products with caution. Before use, please consult the manufacturer's product manual available on the sika.com website.