Special adhesive for car and boat bodywork - SIKA Sikaflex AM - White - 300ml, is used in car, motorhome and boat bodywork for waterproof and flexible assemblies and for sealing existing joints. It is suitable for outdoor applications. Advantages : Polymerizes quickly, without shrinkage under the action of air humidity. Good adhesion without primer on the main materials used in the automotive and marine industries (aluminium, treated steel, copper, wood, plywood, laminate, polyester). Can be sanded and painted. Features : Density: approx. 1.3 depending on the colour Substrate temperature: + 10 C to + 40 C Curing rate: approx. 3 mm in 24 hours at + 23 C and 50% RH Skin formation time: approx. 45 to 60 minutes at + 23 C and 50% RH Colour: White Packaging: 300ml Reference: 1279 Packaging : 1x Special adhesive sealant for car and boat bodywork - SIKA Sikaflex AM - White - 300ml Delivered in its original packaging Tips : The substrates must be cohesive, sound, dry and clean. The substrates must be dust-free and free of any product that may affect the adhesion of the adhesive sealant (grease, dust, rust, old paint, etc.). Place Sikaflex AM cords or studs (a few centimetres apart) on the part to be glued or on the support with a manual gun. Fix the part to be glued to its support before it forms a skin, by applying a simple manual pressure until a minimum thickness of adhesive mastic of 1 mm and 3 mm maximum is obtained. If necessary, hold in place during the first few hours of curing using adhesive paper, shims or a greenhouse gasket. An incorrectly positioned part will easily be adjusted within the first few minutes after application. Press again. The final strength is obtained after complete polymerization. Wait until the adhesive has completely cured before returning to service.