Special body filler for cars and boats - SIKA Sikaflex AM - Black - 300ml

Special bodywork adhesive for cars and boats - SIKA Sikaflex AM - Black - 300ml, is used in car bodywork, motor homes and boats to make waterproof and flexible joints and to seal existing joints. Perfectly suited for outdoor applications. Advantages: Cures quickly, without shrinkage from the action of air moisture. Good adhesion without primer to all major automotive and marine materials (aluminum, treated steel, copper, wood, plywood, laminate, polyester). Can be sanded and painted. Characteristics: Density: approx. 1.3 depending on colour Substrate temperature: + 10 C to + 40 C Curing rate: approx. 3 mm in 24 hours at + 23 C and 50 % RH Skin formation time : approx. 45 to 60 minutes at + 23 C and 50 % RH Colour : Black Packaging : 300ml Reference : 651991 Packaging: A special adhesive for car and boat bodywork - SIKA Sikaflex AM - Black - 300ml Delivered in its original packaging Advice: Substrates must be cohesive, sound, dry and clean. Substrates must be free of dust and other substances that may impair the adhesion of the adhesive (grease, dust, rust, old paint, etc.). Apply beads or dots (a few centimetres apart) of Sikaflex AM to the part to be bonded or to the substrate with a hand gun. Fix the workpiece to be bonded to the substrate before a skin is formed, by applying manual pressure until a minimum thickness of 1 mm and a maximum of 3 mm of adhesive filler is achieved. If necessary, hold in place during the first few hours of polymerization with adhesive paper, a wedge or a clamp. An incorrectly positioned part will be easily adjusted in the first few minutes after application. Apply pressure again. Final strength is achieved after complete cure. Wait until the adhesive has fully cured before putting it back into service.