Special silicone sealant for glass sikaseal 112 glazing - white - 300ml x 2 - Sika

Set of 2 special silicone sealant for glass - SIKA SikaSeal 112 Glazing - White - 300ml, This set of elastic acetic sealant can be used to make glazing and tiling seals. Easy to apply and smooth, this product adheres to most substrates without primer application. Advantages: Easy to implement Simple smoothing Fast polymerization by contact with ambient humidity Good adhesion to most vitrified or enamelled non - porous substrates Features: Density: approx. 1.00 at + 23°C Application temperature: +5°C to +40°C Curing rate: approx. 5 mm in 36 hours (at + 23°C and 50% RH) Skin formation time: approx. 20 min. (at +23°C and 50% RH) Colour: White Conditioning: 300ml Reference: 524981x2 Packaging: 1x Set of 2 special silicone sealant glass - SIKA SikaSeal 112 Glazing - White - 300ml Delivered in its original packaging Tips : Support: Substrates must be cohesive, sound, dry, clean and protected against corrosion. Remove dust, oil, grease, rust, old sealants, materials containing light oils or antioxidants: bitumen, pitch, asphalt, rubber and any product that may affect the adhesion of the sealant. Dry wet substrates. Degrease the supports with acetone and allow them to dry completely, i.e. for at least 10 minutes at + 23 °C. Application: Installation of a joint base with a suitable cross - section, to limit the depth of the sealant joint to the dimensions provided for in DTU 39. Fill the joint with the mastic applied as a continuous joint, avoiding any air inclusion with a manual, pneumatic or electric gun. Tightening and then smoothing with a dry spatula before a skin is formed. Remove burrs and excess product with a cloth impregnated with White Spirit or acetone. The final strength is obtained after complete polymerization. Use Sika products with caution. Before use, please consult the manufacturer's product manual available on the sika.com website.