Super aggressive abrasive paste capable of removing very quickly the marks produced by a sanding process with P600 - 800 grit, depending on the hardness of the resin, including the "snails" resulting from a work with a roto - orbital sander. It is usually applied on molds and hulls. It removes scratches without leaving halos or greasy veils. NW1 paste has a fast and effective polishing action that provides long lasting cleanliness and depth. It is particularly appreciated because it allows a fast removal of imperfections and an optimal polishing in a single step without overheating the surface. Water based product with low VOC emission, not hazardous to health and environment.Recommended application : To be applied with a disc provided with a wool or hard consistency foam cap.Indications for application with disc: Deposit with a spatula or brush a small amount of product on the gelcoat. Work with the disc at low speed spreading with circular and homogeneous movements. If necessary insist until removing streaks and dirt from the gelcoat. Then increase the speed until a perfectly shiny surface is obtained.
Products specifications
Size (L / ml / g / gal /oz) | 3kg |