TR-104 high temperature 390g release wax

high temperature mold release wax TR-104 390g Wax TR-104 is a high temperature stripper designed from carnauba wax. This allows for reduced production waxy formations that take-outs or synthetic resins. Features: Quick and easy Quick drying Aspect glossy wax dressing reduces accumulations of styrene physical state: solid wax mold Allows up to 90 C Drying: 5 to 10 minutes at 22 C (can vary depending on temperature) Colours : pale blue wax Hardness: 1-25 C Contents: 390 gr Made in the USA Advantages: fast drying easy application Can be used up to 90 C deep Brillant used by hand and allows for get a very beautiful state of castings area Tips: for new molds or reconditioned, we advise you to polish the mold before waxing Apply wax in the same circular motion to the mold surface Let dry 20 minutes and polish for get a glossy finish Apply a minimum of 6 layers of wax Wait approximately 30 to 60 minutes between wax applications the best results are obtained after the final application Apply a coat of wax before each molding for the first two or three parts then determine how parts euvent be efficiently produced before having to re-waxing it will then depend on the condition of the mold, configuration, type of resin, cyles the mold, processing the production of gel-coat and other factors Reseal the box after use. Recommended storage conditions: Keep container tightly closed away from sources of ignition or heat at a temperature below 40 C. Warning: toxic to aquatic organisms and flammable. May cause long-term adverse effects in the aquatic environment. Although use appropriate container to avoid environmental contamination.