Wencon UW Cream is a two component cream, to be applied on wet surfaces or under water. The UW Cream is excellent for filling up holes, dents and rebuilding of surfaces which, due to high humidity, has to be done in wet conditions. Typical applications are corroded hulls and all underwater parts of ships and structures, tanks, pipes, flange faces, etc. It is also excellent for filling up cavitation damages on hulls and rudders. After curing Wencon UW Cream is resistant to oil, saltwater, water, most diluted acids and a range of solvents. Can be applied on wet surfaces or under water Cures under water and on wet surfaces For filling up cavitation damages Long pot - life under water Strong adhesion to all metal and GRE surfaces
Products specifications
Colour | Natural |
Other Information | Instructions, for use. pair of nitrile gloves. mixing knife. mixing plate. |
Detailed Specifications | Max temperature +60- +160°C (140 – 320° F) Consistency paste Mixing ratio vol. 1:2 Apply with Spatula Potlife at 20°C 25-35 min. mixed in small amounts Curing time 10-18 hours Machineability yes Specific volume 526 cm3 / kg Dielectric strength 10 KV/mm |
Application | Application areas Typical applications are corroded hulls and all underwater parts of ships and structures, tanks, pipes, flange faces, etc. Wencon UW Cream is also suitable for filling up cavitation damages on hulls and rudders. Mixing Wencon UW Cream has to be mixed above water in the mixing ratio 1:2 by volume. |