Vinyl wood glue R22 - 750g - Bostik

Vinyl wood glue Bostik R22 750g bottle size for assembly and plating all species slow setting, ready for use. Work on clean, dry and flat. wood assembly, veneer laminates for cold and hot on particle board. Features: vinyl adhesive Bostik R22 Capacity: 750g Ready to use Base: polyvinyl acetate emulsion Solids: about 36% pH: about 4.5 Film: opaque white / translucent after drying maximum open time at 20 ° C: 30 minutes, depending porosity minimum temperature carrier for use: + 8 ° C Standards: Ranking D1 according to EN 204 standard Advantages: emulsion adhesive ready to use, long time to open flammable Non staining Non - toxic ; abyss not sharp tools Excellent resistance to tearing Temperature resistance up to 70 ° C Tips: Paste ready to use, mix well before use. Control the workshop temperature before application of the adhesive. It should ideally be between 18 and 25 ° C. Vinyl adhesives are emulsions in water. They did not by taken if one of the two materials at least is absorbent. Materials: The materials to be bonded must be dry, clean, dust, degreased. The humidity of the wood should be between 8 and 12% for interior furnishing works. Surfaces must be perfectly flat. The machining must be very precise to avoid thick joint (maximum set of 2 / 10th mm) may degrade bonding. Direction for use: Apply the adhesive on the support thinly and evenly with a size, spatula, brush, etc. The application is made by gluing one or two sides depending on the porosity of the wood, the ambient conditions (temperature and humidity) and following that one wishes or not lengthen working time. Use Bostik products safely. Before use, read the label and product information.