Wall patching paste with thickness 0.3 to 5mm - SIKA ViscoCim 105 - Light grey - 25kg, designed to eliminate appearance and planimetry defects of interior and exterior walls. It is used for levelling, debubbling and smoothing concrete walls. Advantages : High yield: 30% more surface area covered compared to traditional patching pastes. Speed of application Excellent finishing aspect for painting or applying a top coat. Compatible with EPS, paints, coatings, wall fabrics, wallpaper. Features : Density of the dough: approx. 1.48 Thickness per coat: Mixed with cement: 0.3 to 5 mm / Mixed with plaster: 0.3 to 50 mm Condition of use: Apply in a place sheltered from the sun, wind, between 5C and 30C. Practical duration of use: Mixing with cement: 1 to 2 hours at 20C depending on the type of cement used / Mixing with plaster: 30 minutes at 20C Time between coats: about 4 hours at 20C Recovery time: approx. 3 days at 20C after checking the humidity level. Mixing ratio: 1 volume of Sika ViscoCim to 1 to 1.5 volumes of cement or plaster Consumption: Approx. 0.5 kg / m/ mm thickness Colour : Light grey Packaging : 25kg Reference : 407753 Packaging : 1x Wall levelling compound 0.3 to 5mm thick - SIKA ViscoCim 105 - Light grey - 25kg Delivered in its original packaging Tips : The substrate must be clean, sound, dry, resistant, free of traces of curing agent, paint, formwork oil, laitance. Mix with a trowel, in a trough, one part of paste with about 1 to 1.5 parts of cement or plaster according to the desired consistency. Continue mixing until a homogeneous paste without lumps is obtained. Do not add more water. Do not moisten the substrate. Apply with a stainless steel smoothing machine or coating knife in a maximum thickness of 5 mm per pass.