Wall Panel 3D Wallart Waves 3m2

Wall Panel 3D Wallart Waves 3m2, to decorate your walls and inside a dress. In a restaurant, hotel or simply at home, these panels provide a design and elegance to your environment. Elected ecological products of 2009. The 20 models available allow you to have the choice to decorate any space. Features: Packaging: 12 plates to 3m2 Dimensions: 500x500mm with +/- 0.5mm on each side Weight: 275g Thickness: +/- 1.75mm (Tolerance 0.5mm) Panel thickness: + 15mm Material: cane fiber sugar Surface: smooth Flammable: Class C Acoustics: acoustic insulation properties Tip: If a panel is damaged, it is possible to apply a coating or replace the panel only Installation: Step 1: Wallart signs must first of first be placed 48 hours in the room where they will be installed to allow for acclimatization. This product is made to be installed on flat surfaces, dry and free of defects. All holes or major damage must be repaired before installation. Step 2: Apply glue on all edges of each panel also Apply the glue on any other flat spaces of the rear panel. Press evenly across the panel during installation. Do not forget the corners! Allignez each installed panels Step 3: How to make a panel cut? Measure where you will install the panel then see the dimension with a pencil on your slab. Cut with a cutter, first a first light passage (saw or jigsaw can also be used). Iron on the initial cut by cutting deeper into the panel Sand the cut edge to make it smooth Step 4: Let dry the plant for 4-6 hours. Step 5 (optional): Installation of joints (installation without joint is also possible) Clean the seals with a brush fill the joints with acrylic seal paint or putty (plaster is not recommended) Clean the seals with a wet brush and smooth the joints with your fingers Step 6: the panels are now ready to be painted Step 7: Apply a layer in the installed panels (spray, brush or roller). This step is recommended but not mandatory Let dry Paint the wall following the directions of the selected paint (spray, brush or roller). Step 8: Your installation is now complete! Packaging: Delivered in its original packaging