Waterproof SIKA Sikagard Protection Protection All in 1 - 20L

Manufacturer: Sika
Manufacturer part number: 530250- REMPLAC PAR 26032
€290.89
i h
SIKA Sikagard Waterproof Protection Protection While 1 - 20L, protects most building materials against penetration of water, oil and diesel. The protection is invisible and does not change the appearance of the material. Resistant to UV rays, this product will protect your facades, floors and roofs effectively without yellowing. Advantages: Product in aqueous phase Indoor / outdoor use Protects against the penetration of water, oil, diesel Protects against stains Suitable for all types of facades, floors and roofs Usable on most building materials construction Fast application (in 1 or 2 layers) without waiting time between 2 layers Provides invisible protection, no change of appearance Lightly revives the original colors of the material (according to support and according to shade) Allows the support to breathe Resistant to ultraviolet rays, does not yellow Gives a beading effect on certain materials Facilitates the cleaning of graffiti Be sure to read the instructions before use Characteristics: Density: about 1 to 20 C pH value: about 6 to 20 C Consumption : On Very porous substrates: from 0,30 L to 0,60 L per m and per layer / On Low porous substrates: from 0,05 L to 0,20 L per m and by layer Application temperature: + 5 C min. / + 30 C max Capacity: 20L Color: Transparent Reference: 530250 Packaging: Comes in the original packaging Advice: SUPPORT The substrate must be clean, dust-free and dry. All particles not adhering to the support, contaminations (stains, traces of oil, grease ...) must be removed by brushing or washing with water under pressure. Before applying the product, it is also recommended to clean the support (foams, drips, traces of pollution, etc.). APPLICATION Apply by brush, roller or low pressure sprayer directly to the surface to be treated until the material is saturated. On a porous support: only 1 coat is sufficient. The support must be impregnated uniformly but without excess. Avoid over-consumption and eliminate sagging if necessary. On porous support: Application in 2 layers. The first layer as indicated above. The second coat is applied before the first coat is completely dry (dry to the touch), 30 minutes maximum after the first coat. Split the application of supermarkets into zones of 10 to 20 m. Application without excess in a uniform way. Avoid over-consumption and eliminate sagging if necessary. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews