Waterproof Sikagard 790 All-in-One - 5L

Sikagard 790 All-in-one - 5L water repellent, ready to use, this product in aqueous phase is suitable for all types of facades, floors and roofs. It offers invisible protection against the penetration of water, oil and diesel and facilitates the cleaning of graffiti. Resistant to UV rays, it does not turn yellow and can be applied easily and quickly without waiting between two layers. Advantages: Product in aqueous phase Indoor / outdoor use Protects against the penetration of water, oil, diesel Protects against stains Suitable for all types of facades, floors and roofs Usable on most building materials construction Fast application (in 1 or 2 layers) without waiting time between 2 layers Provides invisible protection Allows the support to breathe Resists ultraviolet rays, does not yellow Gives a beading effect on certain materials Facilitates the cleaning of graffiti (use a specific anti-graffiti cleaner, follow the manufacturer's recommendations) Read the package leaflet before use Characteristics: Density: 1 approximately at 20 C pH: 6 approximately at 20 C Application temperature: + 5 C minimum at + 30 C maximum Consumption: On very porous supports: from 0,30 L to 0,60 L per m and per layer / On Low porous supports: from 0,05 L to 0,20 L per m and by layer Colors: colorless Packaging: Delivered in its original packaging Advice: SUPPORT The support must be clean, dust-free and dry. All particles not adhering to the support, contamination (stains, traces of oil, grease?) Must be removed by brushing or washing with water under pressure. Before Application of the product, it is also recommended to clean the support (foams, drips, traces of pollution, etc.). Application Apply by brush, roller or low pressure sprayer directly to the surface to be treated until the material is saturated. On a porous support: only 1 coat is sufficient. The support must be impregnated uniformly but without excess. Avoid over-consumption and eliminate sagging if necessary. On porous support: Application in 2 layers. The first layer as indicated above. The second coat is applied before the first coat is completely dry (dry to the touch), 30 minutes maximum after the first coat. Split the application of supermarkets into zones of 10 to 20 m. Application without excess in a uniform way. Avoid over-consumption and eliminate sagging if necessary. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.