This SIKA Foundation waterproofing coating is a ready-to-mix mortar used to waterproof, from the outside, foundations, buried or semi-buried walls, walls, basements, breeze blocks, clinker blocks, interior walls of garages, cellars... Applicable directly on the support, it is waterproof and has a very good adherence. Usable until 01/05/2022. Specialized in chemical products, Sika is a leader in the development and manufacture of systems and products for bonding, sealing, soundproofing, reinforcement and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now! Benefits: Applicable directly to masonry, concrete, cinder block foundations Applicable indoors in non-habitable areas such as garages and cellars Waterproof Excellent adhesion to the support Aesthetically pleasing due to its cement gray color Fast curing allowing backfilling in the shortest possible time Characteristics: Density: ? 1.3 / fresh mortar: ? 2 Grain size: from 0 to 0.5 mm Temperature: +5C to +30C Consumption: 2.5 to 3.0 kg /m for 2 coats in manual application or one coat in mechanical application Practical time of use : +5C = >2h / +20C = 1h20 / +30C = 45min Setting time and minimum time between 2 coats: +5C = 7h / +20C = 3h30 / +30C = 45min Waiting time : Dust free: 1 to 3 hours, (to see if the product is dust free, run a wet finger over the Sika Foundation Coating approximately 1 hour after application. If no black streaks are left on the finger, it is dust-free) / Wet-out: 10 to 24 hours / Fully dry: 3 to 7 days. Recoat time: 7 days at +5C / 3 days at +20C (wait for Sika Foundation Coating to dry completely before backfilling) Color : Grey Weight : 25 kg Ref. 152712 DLUO : 01/05/2022 Packaging: A waterproofing coating for foundations, cellars and basements SIKA Foundation Coating - Grey - 25kgDelivered in its original packagingCarefully read the instructions before use.