Mastic white polyurethane EMFI PU 40 X 310ml building 5 EMFIMASTIC PU 40 BUILDING is an elastomeric sealant single component polyurethane base with high elasticity, good resistance to tearing and weathering. Enjoys SNJF label on anodized aluminum and mortar category 25E Can be painted after complete drying Use: Collage of different building materials and for the realization of gaskets sealing Adheres without primer on the most common materials: wood, aluminum, metal coated, polyester, glass, PVC, concrete, terracotta, stone, stoneware, earthenware Features: polyurethane adhesive Colour: White density DIN 52 451 1.18 skin formation: about 1 hour - 1:30 Cure speed: 3mm / 24 Temperature implementation: + 5 C and + 35 C temperature resistance: - 40 C to + 80 C Advantages: for all joints of building Enjoys the SNJF label on anodized aluminum and mortar category 25E High elasticity Resistance tear (DIN 53515) approximately 6.5 N / mm Good UV resistance Excellent resistance to water and mist Can be painted: compatible with water-based paints (solvent-: necessary test) Tips: sUPPORTS They must be flat , dry, dust, grease or other contaminants that could harm bonding. Sand the metal surfaces if necessary. After sanding, clean them again. Dry the surfaces after cleaning. It is recommended to clean concrete with a metal brush. DIRECTIONS FOR USE Apply with a caulking gun. After application, smooth the joint with? S soapy water using? Spatula. This product must be used within 24 hours after the? Opening of the protection of the cartridge or bag, otherwise, the sealant could harden. If? Application in cold weather, store at 20 C before use During polymerization, avoid contact with MS polymers, silicones or hybrid PU uncured as well as? With alcohols or purchase ammonia. Clean tools with methyl ethyl ketone or purchase acetone before the sealant? S not cured. After polymerization, the? Abrasion is required. Use EMFI products safely. Before use, read the label and product information.